Share the cool ITX small chassis using drip and replace the power fan

As a signer for almost a year, he has always been intoxicated with inspiration to save money, save money, use the most cost-effective way to achieve the purpose of thinking, share today's own computer toss the road, and replace the power supply The fan thing.

This article may be unfriendly to obsessive compulsive disorder and obsessive communicators. Please watch it selectively.

I used to be an IT practitioner. I now switch to work in a public institution. I am off duty at work, I'm off for a while, and my wife goes to work during the day. I can only work at home. What can I do? What is the liver? Due to the newly-married new decoration at the end of last year, my wife never objected to me playing the game, but let me put a big tower + light pollution chassis in the study is certainly not possible to agree, so in line with toss and save money The spirit of the discovery of the GoldenField N2 chassis, liters is small and cheap, support for ATX power supply and 120 water cooling row, aluminum shell, you can also support 27cm graphics card, and into.


It is also the so-called pull of the whole body, began to get out of hand.


First talk about the computer, four years ago considered the mainstream configuration, i5-3550 + Z77 + 560Ti, because the Z77 is ATX board, in order to be compatible with the new small chassis, plus toothpaste factory toothpaste in recent years, of course, mainly because " Poor, I feel that there is no need to change the platform, I bought a H61. Remember less than 300 yuan, did not think too much at the time, and the third-generation platform used East addition H61 has nothing to choose from, and Ma Yun did not dare to buy inventory boards, but after a year to tell the truth H61 Not overclocking (CPU power supply is also extremely shabby), the old platform users do not need appearance is really very appropriate, and did not find a bottleneck, may be BIOS garbage, memory support is not very good only up to 16G, there is There is no native USB3.0.


Then there is the GALAXY 560Ti, a nuclear bomb card. After the game is opened, the sound of the fury of the fan plus heat can make you crash. Of course, this video card is not enough to make my liver near the stage of the game, last month, put on a 乞丐 1070, buy 乞丐 1070 down it really is not because of the budget, because the chassis is too small, more than shoulder design can not fit, long Can not let go, coupled with the ITX short card version did not appear at that time, can only choose to believe in the public version and version. Finally, the multi-party consultation, purchased 1070 chasing wind, measured length 27.4, really accompanied by metal friction sound into the chassis.

The graphics card is good, is ugly but the double fan pressure is not overclocking 1070 no problem, the fan does not support automatic start and stop, usually placed on the table can not hear the sound, entertainment master run around the graphics card 24W normal level, run the high number of frames When there is indeed howling, the game usually does not find 100 + frames, do not know the power problem in the end or the graphics card, it seems to be a common problem, but the game can not have 3-400 frame +, so it does not matter.

CPU cooling is also updated, of course, replaced by a water-cooled, I know that some people want to 120 low-end water cooling is not as good as 100 yuan air-cooled, but look at the internal diagram of the chassis and then know that there is no space to install tower-type air-cooled. Someone else is so messy this way why not switch to a custom module line? I bought the full-mode power supply, but I haven't gotten it on the machine yet. (Receive the brother sorry.) Because the module socket will grow a small part at the end of the power supply, it will invade the video card space. It is estimated that only the length can be used if the module power supply is used. In the following 24cm graphics card, not worth the candle. This is the choice of a small chassis, either on the noble SFX power supply, or only use one water-cooled and do 爹 做 娘 娘 做 ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( (.

The hard disk is also gradually added to the two SSDs and two HDD live big sisters according to needs over the years, almost all of the places where the hard disk can be hung up, and it is tightly packed.


Let me talk about the chassis, workmanship is very general, there are no major problems in the design, you can hang two 2.5-inch, two 3.5-inch (or 2.5-inch), independent power supply into the wind, of course, also made some improvements with their own understanding, such as Put the chassis upright and place a foot pad on the bottom to facilitate the air intake, so that the heat that is blown by the graphics card can be discharged through the self-rising or rear cold exhaust. Measured vertical put is indeed faster than laying horizontally, witches 3 full height effect 25601080 with fish screen, lock frame 60 no anti-aliasing, open air conditioning at 25 °C constant temperature, CPU and GPU are at about 55 °C, fan speed is nothing Noise, very satisfied.

There is the rear of the chassis 120 cold row space reserved space is not enough, is not stuck on the backplane thicker graphics card (really so bad 2mm), is the power line stuck, can not be installed smoothly, a word " Demolition." Remove the video card backplane even if you do not want to bend. Remove the power supply wiring outlet and extend the power extension cable directly out of the chassis leaving room for cold-row installation. So now the back of the chassis is indeed ugly, practical party, of course, usually do not see, when he does not exist well.

Well now into the subject, because I am 24 hours a computer is not off, recently found that the computer running fan sounds a bit noisy, the sound source in the chassis can only know one water-cooled fan and a small water pump, video card fan, power fan. Using a screwdriver to force the tactics to finally locate on the power fan, of course, in order not to have to replace the entire power supply for the fan, I said that the power is not boomed. So secondhand East to start a 12cm fan for it, the following look. (The fan that had the problem actually changed it a year ago. Share it here for reference only.)

Because the old power fan uses a small 2-pin interface, the new fan can not be plugged into the 4pin. At this time, the fan cable can be led from the power supply to the motherboard sysfan interface to achieve power supply. Since my mainboard has only one sysfan and one cpufan, here we use a 4pin one-second two-wire CPU fan and power supply fan to connect to the CPU and realize the speed adjustment according to the load. Sysfan is used for cold drainage pumps.


By the way, due to the recent launch of Horizon 3, the original 8GB memory was stretched. Kakaka was not able to do so. I heard that it was a memory pot. It was not easy to open a chassis and it was bought with 8GB2 memory. Memory is not on the link, what is the spot to buy what series, anyway, DDR3 is already expired food.

Well, let's manage the line

After inserting all the lines, it is like this

Final makeup photo

On-Grid Solar System

The On-grid system is connected with utility grid and this system would work only if the grid is available. In case of a power cut, the system will not work and hence the On-grid system is also termed as a Grid-tied system. Grid is required since the inverter needs to be provided a reference voltage and the inverter needs to sync with the grid in order to export energy back into the grid.
On grid systems make sense for locations with no daytime power cut or with less than 2 hrs of daytime power cut. This type of system is apt for reducing your electricity bills since it is cheaper than a battery based system and there is no recurring cost of replacement of panels.

On Grid Solar Inverter,On Grid Solar System,On Grid Solar Power System,On Grid Solar System Price

Wuxi Sunket New Energy Technology Co.,Ltd , https://www.sunketsolar.com

Posted on