The drone does not "fried machine" must pay attention to these 4 points

The drone does not "explode"

First of all, I have not actually operated any drone that weighs more than 4 kilograms, but I have seen dozens of people flying. I have summarized some guidelines on the safety of drones. I hope to buy drones. The novice has some help.

1. Never turn on the power of the aircraft before the official take-off. The aircraft will be turned off the first time after the flight. Do not touch the remote control when turning the power on or off.

The take-off and landing process is when the drone is closest to the person. The speed of the propeller's propeller is very high, and the paddle is very thin, which is easy to cause damage due to operational errors. Therefore, it is the most important thing for novices to ensure that the drones do not move during the human contact period.

2. Check before flight, take off, fly the drone to a vertical distance of about 4 meters, 5 meters away from the radius of the person, check to determine whether the operation is normal.

This is a simple one. If you drive a car, you can also look at the oil meter. Try the brakes. You must check the airplane. Remember the first sentence on the road when you passed the road test? "Reporting the examiner, the vehicle instrumentation is normal, whether it is activated", this is a reason.

3. Do not operate the drone in crowded places.

I hope that every newbie will remember it!!!!! I will focus on it with Article 4.

4. There is a certain threshold for the operation of the drone, and the drone itself has certain dangers.

The drone does not "fried machine" must pay attention to these 4 points

Here to say a few more words, the operation of the drone is a skilled process, from rookie novice to cool play master is a long process, the operation is absolutely forbidden to play on. And the drone itself also has some uncertainty, the reason of the weather, the reason of the operation, the reason of the fuselage itself, the military drone, then the NB thing, not the same down? Therefore, every new entry player should remember this sentence: "To play the drone, you must prepare for the crash."

So, go back to the third article, don't operate the drone in crowded places. I understand that everyone is just like me. There is a hard-hearted heart under the plain appearance. I want to buy a good thing. Take it for a while, but! ! ! ! Don't force it! Just said, there are many uncontrollable factors in the flight and operation process. In places where people are crowded, once the crash occurs, the consequences cannot be considered.

In the end, I would like to say more, outdoor concerts, indoors are all no-flying places, because the indoor signal environment is more complicated, it is prone to interference and out of control, and the outdoor concerts are crowded and the consequences are out of control.

To say so much, I just hope that everyone has a fear of the drone. Every kind of toy is accompanied by danger. Although the drone is a low-altitude flying device, don't forget that he is in the sky, always guarantee safety awareness, and can have fun.

From AOPA cloud

Zhonghui Aviation UAV Driving License Training

The seventh hot appointment registration

Opening hours: June 15, 2016 Training Address: Registration Method of Aviation Technology Building, Lantian Road, Aviation Industry Base, Yanliang District, Xi'an, Shaanxi Province
1. Call company power
2. WeChat registration
3. Come directly to Zhonghui Airlines to register

6.7MM  Wire To Board Connectors.6700series.


What are the main types of wire to wire connectors? In the connector industry, there is also a kind of product called connecting wire, which is often said to be terminal wire. Some terminals have terminals at one end, the other end is welded on the circuit board, and some have terminals at both ends. When these terminals form a male and a female, when the wire rod and wire rod form a mutual connection, the terminal can be regarded as A wire to wire connector, that is to say, most terminal blocks are a wire to wire connector product.


Line to board connector, connector product connecting wire or cable to circuit board. The main embodiment of the line to board connector is that the I / O terminal wire is formed by adding a connector, and the other end of the terminal line is welded on the circuit board, and the connection relationship is formed by the male and female docking of the connector, forming a complete connection scheme. Relatively speaking, many connectors can form a line-to-line relationship, and can also form a line-to-board relationship. One of the more easily distinguished cases is that one section of the connector is welded to the circuit board, and not all connectors are installed on the circuit board in the common welding way.

6.7MM Wire To Board Connectors

6.7MM Wire To Board Connectors

ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com

Posted on