Distribution automation market will reach 100 billion scale

Distribution automation market will reach 100 billion scale

In its 2013 mid-year work conference, the State Grid mentioned that "the development of distribution network construction is a pressing matter of the moment." The first time the distribution network construction was raised to the highest priority level. The provincial companies in the provinces are formulating the investment plan for 2014 in accordance with the requirements of the State Grid. The focus is on distribution network construction.

Internal demand traction distribution automation investment

Distribution automation is an indispensable part of distribution network construction. According to statistics, in 2012, China's distribution automation coverage rate was less than 15%, while the level of distribution automation in developed countries reached more than 50%. With the new type of power supply and load directly connected to the distribution network, new technical problems and challenges are brought to the safe and stable operation of the distribution network; on the other hand, from the perspective of power supply reliability, the distribution network system in China has a long history. The way to go. The solution to these problems depends on a high level of distribution automation systems. Strengthening the construction of distribution automation is the inherent demand for power grid development.

Investment is expected to exceed 100 billion

It is estimated that in the next five years, in the most pessimistic case, the practical distribution automation system will be promoted nationwide with an overall market size of approximately 71.16 billion yuan. The standard model is a neutral assumption, and the investment scale will be 118.6 billion yuan; optimistic scenario To promote integration, the overall investment scale is 177.9 billion yuan. Under the assumption of a neutral investment scale, the average annual investment is 23.72 billion yuan, and the total investment in distribution automation in 2012 is 5.5 billion yuan, and investment growth in the next three years is expected to maintain more than 50%.

Secondary Equipment Enterprises Guide Distribution Network Construction Climax

Since the intelligent transformation of power distribution has relatively high requirements for the system integration capabilities of the corresponding enterprises, large-scale engineering project experience, and hardware and software integration capabilities, only large-scale enterprises that have both primary and secondary equipment and systems for the distribution network can benefit from it. Other companies, such as enterprises that only produce distribution network primary equipment, distribution network secondary equipment and systems, or enterprises that only involve primary distribution network primary equipment, are unlikely to benefit from the large investment in distribution intelligence due to their own level and capabilities. .

Luo Baihui believes that the main companies benefiting from distribution automation are XJ Electric and Guodian NARI. As for Jicheng Electronics and Sifang, because of its strong competitiveness in the field of automation of distribution network, the equipment is short-circuited. After supplementing, it is expected to continue to benefit from the future of distribution network construction; each distribution network company actively develops new products to meet the climax of distribution network construction, and it is also good for the Institute of Electrical Engineering to acquire new products that have “give birth certificates”.

Busbar InsulatorBus Bar Insulator) mainly made from bulk molding compound, unsaturated polymer with fiber glass. Insulator For Busbar with good properties such as electrical resistance, hear resistance, fire resistance, low shrinkage, water resistance. Insulator Cable is two or more wires running side by side and bonded, twisted, or braided together to form a single assembly. In mechanics, cables, otherwise known as wire ropes, are used for lifting, hauling, and towing or conveying force through tension. In electrical engineering cables are used to carry electric currents. An optical cable contains one or more optical fibers in a protective jacket that supports the fibers.
Molded Insulators have a higher resistance to heat and moisture when compared to regular plastic insulators. These molded insulators also have closer height tolerances and higher shatter resistance when compared to ceramic insulators.

bus bar insulator

cable

We warmly welcome friends both domestic and abroad to visit our company, if you have any questions, please contact with us directly.


Bus Bar Insulator And Cable

Busbar Insulator,Insulator For Busbar,Insulator Cable,Bus Bar Insulator

FUZHOU SINGREE IMP.& EXP.CO.,LTD. , https://www.cninsulators.com

Posted on