Measuring Method of Material Negative Ion Detector

The negative ion measurement mode is based on the calculation of the negative ion value detected by the sensor. Here's how to use it:

1. Press the Power button to turn on the device. The display will light up.
2. After 20 seconds, the average number of negative ions per second over that period will be shown on the screen.
3. To start a new measurement, press the Reset button and wait for the display to stabilize.
4. After another 20 seconds, the new average will appear on the screen.
5. Once the measurement is complete, press the Power button again to turn off the device.

The negative ion detection mode allows you to directly view the real-time readings from the sensor. Here’s how to switch to this mode:

1. Hold down the Reset button for more than two seconds to switch to Mode 2.
2. Start the measurement immediately. The results will be displayed in real time during the process.
3. To repeat the measurement, press the Reset button again and wait for the display to update.
4. When finished, press the Power button to shut down the device.

This measuring device is primarily used to detect negative ions emitted from natural ores, ceramics, and similar materials. It is especially useful for testing products made from these materials, such as fabrics, bedding, clothing, wall coverings, and decorative items. This tool helps in quality control, marketing, and product promotion.

The measurement method involves using a high-sensitivity GM tube to detect the weak radiation emitted by natural ores and ceramics, which is then converted into a negative ion reading. The device can also be used for ore analysis, testing magic cushions, and evaluating rock pot baths, which are currently very popular in wellness and relaxation practices.

Previous: Ultrasonic Application